- Add LocalSieveApplied table (schema v32) keyed by (accountId, messageId)
so each email is processed by Sieve at most once, even across restarts.
- Implement EmailRepository.applySieveRules(): loads the active local Sieve
script, runs the interpreter against new INBOX emails, and queues pending
move/delete/flag_seen changes for any matched rules.
- Wire applySieveRules() into both _AccountSync._sync() and
_JmapAccountSync._sync() after the per-mailbox email sync loop.
- Make _flushPendingChangesImap() treat NONEXISTENT / not-found errors as
silent no-ops (counts as flushed) so a second device racing on the same
email does not accumulate retries.
- Add migration test assertions and a dedicated unit test suite covering
rule matching, deduplication, discard, and multi-email processing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Track how long each mailbox takes to sync and display it in the
sync log expanded view (e.g. "2 new · 5 up-to-date · 1.3s").
- Add optional `duration` field to `MailboxSyncStats`
- Capture per-mailbox start/end time in both IMAP and JMAP sync loops
- Store as `duration_ms` in `sync_log_mailboxes` (schema v30 migration)
- Read back and reconstruct `Duration` in repository
- Show timing alongside fetch/skip counts in per-mailbox breakdown
- Extract `_fmtDuration` helper, reuse for the existing total duration
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Future.any([Future.delayed(N), stopSignal.future]) left unfired Timers
alive after stop() fired the signal — pending Timers kept the Dart event
loop running and prevented the process from exiting, causing the E2E
integration test to time out (exit 124) instead of exiting cleanly.
Replace all four occurrences with an explicit Timer that completes the
stop-signal and is cancelled in a finally block, so the Dart isolate can
exit as soon as the sync loops are stopped.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add snoozedUntil and snoozedFromMailboxPath to Emails table.
- Implement snoozeEmail and wakeUpEmails in EmailRepository.
- Update IMAP and JMAP flush logic to handle snooze/unsnooze.
- Update sync logic to parse snz: keywords from server.
- Add SnoozePicker widget and integrate into UI.
- Add unit tests for Snooze logic.
- Fix IMAP attachment sizes showing as '0 B' by falling back to decoded content length.
- Fix IMAP attachment downloads failing for single-part fetches by falling back to root message.
- Implement immediate server-side sync for deletions/flags using a new onChangesQueued stream.
- Automate FVM SDK setup and add 'task setup'.
- Make MobSF optional in build-android to handle environment restrictions.
- Update test fakes to match EmailRepository interface changes.
Adds a sync icon to the AppBar of the sync log screen. Tapping it wakes
the account's idle/wait loop immediately and shows a spinner until the
next log entry arrives.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Added lint rule to analysis_options.yaml and ran dart fix --apply to convert
125 relative imports in 33 files to package:sharedinbox/... style.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When account.verbose is true, raw IMAP/JMAP protocol traffic is captured
via a Zone, redacted of credentials (LOGIN password, AUTHENTICATE tokens),
and stored in the sync log entry for display in the sync log screen.
- DB schema v13: adds verbose column to accounts, protocolLog to sync_logs
- IMAP: Zone print-capture feeds ImapClient isLogEnabled output
- JMAP: JmapClient.call() writes request/response bodies to zone buffer
- Sync log screen: shows a monospace "Protocol log" block when present
- Edit account screen: adds verbose toggle with warning subtitle
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Each sync cycle now records per-mailbox fetched/skipped/bytes in a new
sync_log_mailboxes table and displays a collapsible "Per mailbox" section
in the sync log screen.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add _CapturingSyncLogRepository and two tests (IMAP + JMAP) that assert
a failed sync cycle produces an error entry in the sync log. Also
replace .ignore() in the catch blocks with a proper try-catch so the
sync log write is genuinely attempted and any secondary failure is
logged to stdout rather than silently dropped.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Previously the catch block awaited _syncLog.log(), so a second DB error
(e.g. lock contention) would escape the catch, skip the log() call and
the backoff delay, and surface as an unhandled exception. Using .ignore()
means a log write failure is silently dropped but the error is always
printed to stdout and the backoff always runs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Track how many emails were already up-to-date (skipped) and the
approximate bytes transferred per sync cycle. SyncEmailsResult
accumulates fetched/skipped/bytes across mailboxes; DB schema v11
adds emailsSkipped and bytesTransferred columns to sync_logs.
SyncLogScreen shows "X new · Y up-to-date · took Zs" in the tile
subtitle with full detail rows in the expansion panel.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- syncEmails/syncMailboxes/flushPendingChanges now return int counts
- SyncLogs DB schema v10: adds protocol, mailboxesSynced, pendingFlushed
- SyncLogEntry carries all new fields; AccountSyncManager collects and logs them
- SyncLogScreen uses ExpansionTile with per-row detail rows
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add watchJmapPush(accountId, password) to EmailRepository; IMAP and
JMAP-without-push return Stream.empty() so callers fall through to polling
- EmailRepositoryImpl opens an SSE (text/event-stream) connection to the
server's eventSourceUrl; yields void on each StateChange event; properly
cancellable via StreamController.onCancel
- _JmapAccountSync._wait() subscribes to watchJmapPush and races it against
the 30 s poll timer and the stop signal — whichever fires first unblocks
the next sync cycle
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
setFlag/moveEmail/deleteEmail for IMAP accounts now enqueue to
pending_changes (with uid + mailboxPath in the payload) and apply an
optimistic local update, instead of calling the IMAP server directly.
flushPendingChanges dispatches on account type: JMAP uses the existing
Email/set path; IMAP opens one connection and drains all queued changes.
Connection failure marks every queued row with an incremented attempt
count so retries work correctly.
_AccountSync._sync() now calls flushPendingChanges before syncing so
queued mutations are delivered on the next poll.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move ImapConnectFn typedef to imap_client_factory so it can be shared.
Inject it into AccountSyncManager/_AccountSync so tests can substitute a
no-op instead of hitting a real IMAP server.
_AccountSync._sync() now iterates all mailboxes from the repository after
syncMailboxes, mirroring the JMAP loop that was already in place.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
For JMAP accounts, setFlag/moveEmail/deleteEmail now write to the
pending_changes table instead of making direct server calls, enabling
offline-first mutation with durable retries.
flushPendingChanges() drains the queue at the start of each JMAP
sync cycle via Email/set (flag updates use keyword patches; move
updates mailboxIds; delete uses Email/set destroy). On failure the
attempt count and last error are recorded; the change remains queued.
Local DB is updated optimistically on mutation so the UI responds
immediately.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
AccountSyncManager now starts a _JmapAccountSync loop for JMAP accounts
alongside the existing _AccountSync for IMAP accounts.
_JmapAccountSync:
- Syncs mailboxes then emails for each known mailbox per cycle.
- Polls every 30 seconds (no IDLE for JMAP; EventSource deferred).
- Reuses the same exponential backoff (5–300 s) on failure.
- stop() interrupts the poll wait immediately via a Completer.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Account model gains `username` field (default empty → falls back to email then local-part)
- ConnectionTestService returns the effective username that succeeded; tries email then local-part when blank
- JMAP connection probe uses Basic-auth GET to /.well-known/jmap (401/403 = auth failure)
- IMAP/SMTP factory passes explicit username parameter
- Add/edit account screens show username field and "Try connection" button
- EditAccountScreen reuses stored password when no new password is entered
- Unit tests for ConnectionTestServiceImpl (IMAP + JMAP paths, fallback logic)
- Fix unit test lambda signatures for updated ImapConnectFn/SmtpConnectFn
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add account wizard: email-first flow with JMAP/IMAP auto-detection
via well-known URLs; falls back to manual type selection
- Fix JMAP connection probe: GET session URL with Basic auth instead
of the API endpoint, so 401 reliably signals bad credentials
- Account list tile: tap → open INBOX directly; popup menu for
all mailboxes / edit / delete (with confirmation dialog)
- Show account type (JMAP/IMAP) and async connection status per tile:
spinner while checking, green check on success, red error on failure
- Add EditAccountScreen: edit name, password, server settings; runs
connection test only when password is changed
- Fix GTK window initialisation order so app starts with correct size
- Fix 42 lint issues (avoid_redundant_argument_values,
unnecessary_non_null_assertion, unawaited_futures)
- 147 tests, 87% coverage, task check green
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
IMAP/SMTP email client with offline-first architecture:
sync engine writes to Drift (SQLite), UI reads reactively
from the local DB. enough_mail vendored under packages/.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
