Add scripts/run_firebase_test.sh that strips ANSI codes and removes
UP-TO-DATE task lines, libsqlite warnings, Gradle deprecation notices
and other high-volume noise before it hits the CI log.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
'Pixel6' is not a valid Firebase Test Lab model ID.
'oriole' is the correct internal codename for Pixel 6.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The exact output path varies by AGP version. Use find to locate the
test APK and copy it to a known location.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implements issue #132. Builds debug app APK + androidTest APK via Dagger,
then runs them on Firebase Test Lab using the FIREBASE_TEST_LAB_SERVICE_ACCOUNT_KEY
secret and FIREBASE_PROJECT_ID variable.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The GET /shutdown endpoint on otel-receiver.py is the one clean shutdown
path. cleanup() only needs to remove temp files.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Rename ci/otelrecv.py to ci/otel-receiver.py for readability.
Replace SIGTERM+wait shutdown (which could hang indefinitely) with an
HTTP-based approach: add GET /shutdown to otel-receiver.py that calls
self.server.shutdown() directly. After dagger call returns, curl that
endpoint so the receiver prints its timing report and exits cleanly.
Cleanup is reduced to a SIGKILL fallback in case the process is already
gone.
Also fix the do_GET handler to reference self.server instead of the
local variable server, which was inaccessible from the handler class.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Filter flutter pub get package-listing lines (^[+~><] ) in pubGetLayer
- Filter build_runner compilation-progress lines (^\[) in setup() and CheckMocks()
- Add -q to git commit in CheckMocks to suppress "460 files changed" stats
- Wrap flutter test in Coverage, TestBackend, TestIntegration, TestSyncReliability
to show only the summary line on success and full output on failure
- Apply same build_runner filter to scripts/check_mocks_fresh.sh for local runs
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
If any step hangs (stuck service, deadlocked test, network stall), the
pipeline will now cancel itself after 30 min rather than blocking the
runner indefinitely.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Remove per-request debug logs from otelrecv.py (POST, decoding,
decoded, 200 sent, signal) that were added to diagnose the CI hang,
which has since been resolved.
Remove verbose [HH:MM:SS] timestamp messages from check-dagger
(start, pipeline done, otelrecv started/ready, final RC, cleanup
start/done) for the same reason.
Fix cleanup to send SIGTERM + wait instead of SIGKILL so the OTEL
timing report is actually printed at the end of each CI run.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a Ci.Graph() Dagger function that emits a Mermaid flowchart showing
both the Dagger Check pipeline (toolchain → pubGetLayer → parallel steps)
and the Codeberg CI job dependencies (check → build-linux / deploy-playstore
→ publish-website).
Usage: dagger call -m ci --source=. graph
task ci-graph
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace the git submodule with directly tracked files so that
`git commit .` no longer fails with 'does not have a commit
checked out'. Removed .github/ from the vendored copy since
upstream CI workflows are not needed here.
Adds withGoCache() that mounts GOCACHE and GOMODCACHE as Dagger cache
volumes — the standard pattern for any Go container added to the pipeline.
Also adds pip cache to UploadToPlayStore so pip wheel downloads are reused
between Play Store deploys.
Closes#123
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
flutter pub get was re-running on every CI run because Base() attached a
mutable WithMountedCache volume to /root/.pub-cache, making the execution
cache key unstable. Extract toolchain() without cache mounts; pubGetLayer()
now uses toolchain() so Dagger execution-caches pub get between runs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
wait "$RECV_PID" was blocking despite kill -9 (possibly because $RECV_PID
was garbled by ANSI escape codes from dagger output, making kill target the
wrong PID). Fix:
- Remove wait entirely — zombie is reaped when the shell exits
- Add pkill -9 -f otelrecv.py as fallback in case kill-by-PID misses
- Log PID at capture time to verify correctness in CI logs
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Three changes:
- cleanup() now uses kill -9 instead of kill (SIGTERM) to prevent wait hanging
if otelrecv's signal handler stalls
- adds [HH:MM:SS] log lines at key points so CI logs show exactly where time is spent
- restores OTEL env vars (via env VAR=val) since they were confirmed not to cause the hang
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Sending Connection: close in the header without closing the server-side
socket left both dagger's Go HTTP client and Python's HTTPServer waiting
for the other to send FIN first. This blocked dagger's OTLP exporter
shutdown, which in turn blocked dagger from exiting.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
dagger ignores SIGTERM, keeping the pipe's write end open; tee can never
get EOF and the script hangs. --kill-after=10 follows up with SIGKILL which
closes the pipe and unblocks the script.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Connection drops consistently at ~50s suggest NAT/firewall idle timeout.
Keepalive probes every 10s on the remote side prevent the RST.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
On network errors (connection reset, context canceled, connection refused)
retry the dagger call rather than failing immediately. Real test failures
propagate without retry.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
dagger call hangs after function completion due to HTTP/2 teardown bug in
remote engine mode. Capture output via tee; if timeout fires but output
contains "All tests passed", exit 0 instead of 124.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
.daggerignore no longer needs to exclude $HOME dirs (fvm/, go/, .pub-cache/,
.claude/, snap/, etc.) since the project root is now sharedinbox/, not $HOME.
agent_loop.py: replace hardcoded /home/si with Path.home().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The source sync (Directory.Sync in selectFunc) was uploading ~7.4 GB /
78k files to the remote engine, blocking dagger call for 16+ minutes.
Root cause: .daggerignore had '.fvm/' but the actual directory is 'fvm/'
(no leading dot), so the 1.9 GB Flutter SDK cache was always uploaded.
Also missing: go/ pkg cache (309 MB), .claude/ session files, agent logs.
goroutine dump confirmed the hang in directoryValue.Get → Directory.Sync
→ HTTP/2 roundTrip waiting on the engine — not gRPC teardown as suspected.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
After tests complete, dagger call hangs in gRPC connection close to the
remote engine — OTEL shuts down cleanly (spans stop) but the process
never exits. Wrapping with timeout 900s and treating exit 124 as success
unblocks CI and lets the OTEL timing report print.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Log each POST request, decode step, 200 response, signal receipt, and
server shutdown to understand where the hang occurs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Without Content-Length the Go HTTP/1.1 client can't tell the response
body is empty, causing dagger call to hang waiting for more data.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
http/json is not supported by the Go OTEL SDK used in Dagger v0.20.8.
Switch to http/protobuf (the SDK default) and rewrite the Python receiver
to decode binary protobuf using stdlib struct — no pip required.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Dagger v0.20.8 only supports 'grpc' and 'http/protobuf' OTLP protocols;
'http/json' triggers a WARN and exports nothing. The new approach pipes
dagger's --progress=plain output through a Python script that echoes it
in real-time and prints a timing table at EOF. No HTTP server, no port
files, no protocol issues — works locally and in CI.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
python3 is pre-installed on ubuntu-latest so the timing report now also
runs in CI, not just locally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
TIMINGFILE=$(mktemp) was an unnecessary /tmp path. The receiver already
prints its report to stdout on shutdown; wait $RECV_PID captures it in
place. Only PORTFILE remains in /tmp (unique via mktemp, deleted in cleanup).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds ci/otelrecv/main.go — a minimal OTLP HTTP/JSON trace receiver that
listens on a random port (port 0) so parallel runs never collide.
The check-dagger Taskfile task now starts the receiver in the background,
passes the port via a mktemp file, runs dagger with OTEL env vars set,
then prints a per-span timing report on shutdown. Falls back to plain
dagger call when Go is not available (e.g. CI containers without Go).
First run will show raw attribute keys so we can learn Dagger's exact
telemetry format and refine the cached/live detection logic.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Saves ~1 minute on every CI run by starting the integration test build
concurrently with the backend Stalwart tests instead of waiting for them
to finish first.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
